← All FAQs

How Can I Reset My Central AC When Not Blowing Cold Air?

To reset a central AC that isn’t blowing cold air, turn the thermostat to Off, cycle the AC breaker Off and back On, then return the thermostat to Cool after a short wait. The most common reason this helps is a tripped breaker or a safety lockout after a power blip or coil freeze. A proper reset clears the control board and gives the compressor time to equalize pressure; don’t keep resetting if it trips again. In our coastal area near Indialantic, windblown salt and debris can restrict the outdoor coil, so a reset works best when airflow is restored. One technician cue: if the indoor fan runs but the outdoor unit is quiet, a drain float switch from a clogged condensate line may have cut cooling.

Try these steps in order:

  • Set thermostat to Off; wait 5 minutes.
  • Turn the outdoor unit’s breaker Off for 60 seconds, then On.
  • Replace a dirty filter and clear leaves from the outdoor coil.
  • Set thermostat to Cool and a few degrees below room temp.
  • If it cools briefly then fails again, schedule service.

If you smell burning, see ice on the refrigerant lines, or the breaker keeps tripping, leave the system off and call a professional.

Updated: 2026-06-27

Need help in Indialantic, FL? Call (321) 222-6226 or book online.

Sources 12

Still Have Questions?

Our experienced team is here to answer your questions and help you find the right solution.

Call nowSchedule service